As an Amazon Associate I earn from qualifying purchases.

1. Monstrum

#ad

Monstrum Picatinny Rail Mount for Savage Axis/Edge Rifles

#ad
Monstrum #ad - All monstrum scope mounts and accessories come with a lifetime guarantee. 7 inches or 16 rail slots in length, allowing for flexible placement of optics for optimum eyerelief and cheek weld. Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required. Allows for the mounting of Picatinny or Weaver standard scope rings, red dots, scope mounts, or other optics. Picatinny rail mount built specifically for Savage Axis/Axis II/Edge rifle platforms.
BrandMonstrum #ad
ManufacturerMonstrum #ad
Part NumberSAV-02

2. Evolution Gun Works

#ad

Evolution Gun Works Savage Edge Axis Mount 0 MOA

#ad
Evolution Gun Works #ad - Also, in many cases, it will not obstruct usage of factory iron sights. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. Made specific to the new Savage Axis/Axis II.
BrandEvolution Gun Works #ad
ManufacturerEvolution Gun Works #ad
Height1 Inches
Length9 Inches
Weight15 ounces
Width4 Inches
Part Number41800
Model41800

3. Monstrum

#ad

Monstrum Dual Ring Scope Mount for Savage Arms Axis/Edge Rifles | 1 Inch Diameter

#ad
Monstrum #ad - Precision machined from 6061 grade aluminum, comparable in weight to most scope rings with the added rigidity of a unified one piece mount design. Dedicated one piece dual ring scope mount built specifically for the Savage Arms Axis/Edge platform. All monstrum scope mounts and accessories come with a lifetime guarantee. 1 inch in diameter for precision mounting of standard 1 inch tube rifle scopes. Scope mount installs directly to the receiver via the factory mounting holes and included set screws with no additional hardware required.
BrandMonstrum #ad
ManufacturerMonstrum #ad
Part NumberSAV-01

4. Outerimpact

#ad

Outerimpact Savage AccuTrigger Rounded Receiver Short Action Picatinny Scope Base with 0 MOA

#ad
Outerimpact #ad - Coating: type iii hard coat anodized 68 Rockwell. If your gun does not have an accu-Trigger, 11, 14, this will NOT work on your gun. There is a good chance you need a Picatinny Base that accommodates a "flat-back receiver" This is for SHORT action receivers.

Additional tools: T-10 Torx driver not included. Finish: matte black, material: Billet 6061-T6 aluminum. Please confirm that your receiver uses 6-48 screws. Compatible guns: savage accu-trigger round receiver: 10, 12, 16 *note: does not fit 10 ba or axis and axis ii. Moa: 0 . Please consult graphic with hole spacing measurements to determine if your receiver is a SHORT action. Mounting hardware: four 4 6-48 weaver t-10 torx head screws included.
BrandOuterimpact #ad
ManufacturerOuterimpact #ad
Length6 Inches
Weight0.3 ounces
Part NumberOTL-SAVS-PCAT02

5. Leupold

#ad

Leupold Standard Two-Piece Scope Base , Savage 10/110 Round Rcvr, Matte

#ad
Leupold #ad - Model #55742 - standard two-piece base Savage 10/110 Round Rcvr with a Matte finish. Forged and machined steel construction. 2-piece bases fit right and left-hand actions. Designed to match up with Leupold STD rings.
BrandLeupold #ad
ManufacturerLeupold #ad
Height0.6 Inches
Length5.2 Inches
Weight0.2 Pounds
Width4.4 Inches
Part Number0603-9793
Model55742
WarrantySee manufacturer

6. IORMAN

#ad

IORMAN 2 Pcs Rifle Scope 30mm 25.4mm 1 inch Tactical Light Flashlight Mounts Scope Ring Adaptor with Picatinny Weaver Universal Rail

#ad
IORMAN #ad - 4 slots picatinny weaver rail for backup Second Laser, sight or light flashlight. With double allen head screws on both sides makes this mount very secure for any scope. 2 pcs weaver style 30mm to 25. 4mm scope adapter.
BrandIORMAN #ad
ManufacturerIORMAN #ad

7. Evolution Gun Works

#ad

Evolution Gun Works Savage Round Back Short Action Picatinny Rail Scope Mount 20 MOA Ambidextrous

#ad
Evolution Gun Works #ad - Rail type: One Piece Picatinny. Mounting hardware: #6-48 x 1/4 Screws and T-10 Bit Included. Machined from: domestic 6061 T6 Extruded Aluminum. Finish: matte Black Anodizing. Height:. 4" top of receiver to Top of Picatinny, Weight: 2 oz.
BrandEvolution Gun Works #ad
ManufacturerEvolution Gun Works #ad
Weight4 ounces
Part Number41002
Model41002