Parker EM25 EM Series Sintered Bronze Muffler/Filter, 1/4″ NPT Male, 9/16″ Hex Size, 250 psi

#ad
#ad
Parker EM25 #ad - Pneumatic valves should be used with filtered and lubricated air. 9/16" hex size em series sintered bronze Muffler/Filters reduce air exhaust noises to an industry accepted level with minimum flow restriction. Ambient temperatures below freezing require moisture-free air. Muffler/filters effectively reduce air exhaust noises to an industry accepted level with minimum flow restriction.

Non-corrosive. They protect valves, impact wrenches, screw drivers and other air tools by preventing dirt and other foreign matter from entering the system. Can be cleaned with many common solvents. Maximum operating pressure: 250 psig air. Ambient temperatures below freezing and above 180 degree require lubricants especially selected for suitability at these temperatures.

Parker EM25 EM Series Sintered Bronze Muffler/Filter, 1/4" NPT Male, 9/16" Hex Size, 250 psi #ad - They protect valves, impact wrenches, screw drivers and other air tools by preventing dirt and other foreign matter from entering the system. Can be cleaned with many common solvents. Non-corrosive.

More information about Parker EM25 #ad

Parker 047040004 Sintered Bronze Breather Vent, 1/4 " NPT Male, 0.63" Length, 150 psi

#ad
#ad
Parker 047040004 #ad - Use for vacuum relief or pressure equalization in gear boxes, reservoirs, oil tanks, etc.0 to 300 degree F Operating temperature. These low silhouette versions of the muffler / filter are useful where space is a problem and / or to prevent contamination. Non-corrosive. Sintered bronze breather vent. 9/16" hex.

150psi Maximum operating pressure. 063" length. 1/4" npt port size.

More information about Parker 047040004 #ad


Similar products



Parker ASN-8 Acetal Plastic Exhaust Air Line Silencer, 1/4" NPT, 124 scfm Flow, 150 psi

#ad
#ad
Parker ASN-8 #ad - Fits directly into the exhaust port of most commercial valves. Protects components from contamination. Excellent noise reduction. Polyethylene element. 063" length. The plastic silencer is designed to give excellent noise reduction with a minimum effect on air efficiency. Easy to install. Sound pressure level 67dba at 20 psIG inlet and 84dBA at 100 PSIG inlet.

The "trimline" design allows for locating the silencer in the tightest places without extra plumbing or fittings. Open surface area of element allows for rapid discharge of air without undesirable back pressure. 1/4" npt threads available. 150psi Maximum operating pressure. Sintered bronze breather vent. Compact, lightweight.

Parker ASN-8 Acetal Plastic Exhaust Air Line Silencer, 1/4" NPT, 124 scfm Flow, 150 psi #ad - 1/4" npt port size. 0 to 300 degree F Operating temperature.

More information about Parker ASN-8 #ad


Similar products